Document Transformers

Document Transformers modify the information returned about documents in the results of a query.

Using Document Transformers

When executing a request, a document transformer can be used by including it in the fl parameter using square brackets, for example:

fl=id,name,score,[shard]

Some transformers allow, or require, local params which can be specified as key value pairs inside the brackets:

fl=id,name,score,[explain style=nl]

As with regular fields, you can change the key used when a Transformer adds a field to a document via a prefix:

fl=id,name,score,my_val_a:[value v=42 t=int],my_val_b:[value v=7 t=float]

The sections below discuss exactly what these various transformers do.

Available Transformers

[value] - ValueAugmenterFactory

Modifies every document to include the exact same value, as if it were a stored field in every document:

q=*:*&fl=id,greeting:[value v='hello']&wt=xml

The above query would produce results like the following:

<result name="response" numFound="32" start="0">
  <doc>
    <str name="id">1</str>
    <str name="greeting">hello</str></doc>
  </doc>
  ...

By default, values are returned as a String, but a t parameter can be specified using a value of int, float, double, or date to force a specific return type:

q=*:*&fl=id,my_number:[value v=42 t=int],my_string:[value v=42]

In addition to using these request parameters, you can configure additional named instances of ValueAugmenterFactory, or override the default behavior of the existing [value] transformer in your solrconfig.xml file:

<transformer name="mytrans2" class="org.apache.solr.response.transform.ValueAugmenterFactory" >
  <int name="value">5</int>
</transformer>
<transformer name="value" class="org.apache.solr.response.transform.ValueAugmenterFactory" >
  <double name="defaultValue">5</double>
</transformer>

The value option forces an explicit value to always be used, while the defaultValue option provides a default that can still be overridden using the v and t local params.

[explain] - ExplainAugmenterFactory

Augments each document with an inline explanation of its score exactly like the information available about each document in the debug section:

q=features:cache&fl=id,[explain style=nl]

Supported values for style are text, html, and nl which returns the information as structured data. Here is the output of the above request using style=nl:

{ "response":{"numFound":2,"start":0,"docs":[
      {
        "id":"6H500F0",
        "[explain]":{
          "match":true,
          "value":1.052226,
          "description":"weight(features:cache in 2) [DefaultSimilarity], result of:",
          "details":[{
}]}}]}}

A default style can be configured by specifying an args parameter in your solrconfig.xml configuration:

<transformer name="explain" class="org.apache.solr.response.transform.ExplainAugmenterFactory" >
  <str name="args">nl</str>
</transformer>

[child] - ChildDocTransformerFactory

This transformer returns all descendant documents of each parent document matching your query. This is useful when you have indexed nested child documents and want to retrieve the child documents for the relevant parent documents for any type of search query.

Note that this transformer can be used even when the query used to match the result documents is not a Block Join query.

q=book_title:Solr&fl=id,[child childFilter=doc_type:chapter limit=100]

If the documents involved include a _nest_path_ field, then it is used to re-create the hierarchical structure of the descendent documents using the original pseudo-field names the documents were indexed with, otherwise the descendent documents are returned as a flat list of anonymous children.

childFilter

Optional

Default: all children

A query to filter which child documents should be included. This can be particularly useful when you have multiple levels of hierarchical documents.

limit

Optional

Default: -1

The maximum number of child documents to be returned underneath the document being augmented. The default is -1 which means unlimited.

fl

Optional

Default: see description

The field list which the transformer is to return. The default is the top level fl.

There is a further limitation in which the fields here should be a subset of those specified by the top level fl parameter.

parentFilter

Optional

Default: none

Serves the same purpose as the of/which params in {!child}/{!parent} query parsers: to identify the set of "all parents" for the purpose of identifying the beginning & end of each nested document block. This recently became fully optional and appears to be obsolete. It is likely to be removed in a future Solr release, so if you find it has some use, let the project know!

Experimental childFilter Syntax

When a _nest_path_ field is defined, the childFilter option supports an experimental syntax to combine a "path syntax" restriction with a more traditional filtering query.

This syntax is triggered by including a / seperated path structure prior to a query that includes a : character.

When the "path" begins with a / character, it restricts matches to documents that have that exist "path" of nested pseudo-field documents, starting at the Root document of the block (even if the document being transformed is not a Root level document)

Some Examples:

  • childFilter="/skus/*:*"

    • Matches any documents that are descendants of the current document and have a "nested path" of /skus, but not any children of those skus.

  • childFilter="/skus/color_s:RED"

    • Matches any documents that are descendants of the current document; match color_s:RED; and have a "nested path" of /skus, but not any children of those skus.

  • childFilter="/skus/manuals/*:*"

    • Matches any documents that are descendants of the current document and have a "nested path" of /skus/manuals, but not any children of those manuals.

When paths do not start with a / they are treated as "path suffixes":

  • childFilter="manuals/*:*"

    • Matches any documents that are descendents of the current document and have a "nested path" that ends with "manuals", regardless of how deeply nested they are, but not any children of those manuals.

[shard] - ShardAugmenterFactory

This transformer adds information about what shard each individual document came from in a distributed request.

ShardAugmenterFactory does not support any request parameters, or configuration options.

[docid] - DocIdAugmenterFactory

This transformer adds the internal Lucene document id to each document – this is primarily only useful for debugging purposes.

DocIdAugmenterFactory does not support any request parameters, or configuration options.

[elevated] and [excluded]

These transformers are available only when using the Query Elevation Component.

  • [elevated] annotates each document to indicate if it was elevated or not.

  • [excluded] annotates each document to indicate if it would have been excluded - this is only supported if you also use the markExcludes parameter.

fl=id,[elevated],[excluded]&excludeIds=GB18030TEST&elevateIds=6H500F0&markExcludes=true
{ "response":{"numFound":32,"start":0,"docs":[
      {
        "id":"6H500F0",
        "[elevated]":true,
        "[excluded]":false},
      {
        "id":"GB18030TEST",
        "[elevated]":false,
        "[excluded]":true},
      {
        "id":"SP2514N",
        "[elevated]":false,
        "[excluded]":false},
]}}

[json] / [xml]

These transformers replace a field value containing a string representation of a valid XML or JSON structure with the actual raw XML or JSON structure instead of just the string value. Each applies only to the specific writer, such that [json] only applies to wt=json and [xml] only applies to wt=xml.

fl=id,source_s:[json]&wt=json

[subquery]

This transformer executes a separate query per transforming document passing document fields as an input for subquery parameters. It’s usually used with {!join} and {!parent} query parsers, and is intended to be an improvement for [child].

  • It must be given an unique name: fl=*,children:[subquery]

  • There might be a few of them, e.g., fl=*,sons:[subquery],daughters:[subquery].

  • Every [subquery] occurrence adds a field into a result document with the given name, the value of this field is a document list, which is a result of executing subquery using document fields as an input.

  • Subquery will use the /select search handler by default, and will return an error if /select is not configured. This can be changed by supplying foo.qt parameter.

Here is how it looks like using various formats:

XML
  <result name="response" numFound="2" start="0">
      <doc>
         <int name="id">1</int>
         <arr name="title">
            <str>vdczoypirs</str>
         </arr>
         <result name="children" numFound="1" start="0">
            <doc>
               <int name="id">2</int>
               <arr name="title">
                  <str>vdczoypirs</str>
               </arr>
            </doc>
         </result>
      </doc>
  ...
JSON
{ "response":{
    "numFound":2, "start":0,
    "docs":[
      {
        "id":1,
        "subject":["parentDocument"],
        "title":["xrxvomgu"],
        "children":{
           "numFound":1, "start":0,
           "docs":[
              { "id":2,
                "cat":["childDocument"]
              }
            ]
      }}]}}
SolrJ
 SolrDocumentList subResults = (SolrDocumentList)doc.getFieldValue("children");

Subquery Result Fields

To appear in subquery document list, a field should be specified in both fl parameters: in the main fl (despite the main result documents have no this field), and in subquery’s fl (e.g., foo.fl).

Wildcards can be used in one or both of these parameters. For example, if field title should appear in categories subquery, it can be done via one of these ways:

fl=...title,categories:[subquery]&categories.fl=title&categories.q=...
fl=...title,categories:[subquery]&categories.fl=*&categories.q=...
fl=...*,categories:[subquery]&categories.fl=title&categories.q=...
fl=...*,categories:[subquery]&categories.fl=*&categories.q=...

Subquery Parameters Shift

If a subquery is declared as fl=*,foo:[subquery], subquery parameters are prefixed with the given name and period. For example:

q=*:*&fl=*,**foo**:[subquery]&**foo.**q=to be continued&**foo.**rows=10&**foo.**sort=id desc

Document Field as an Input for Subquery Parameters

It’s necessary to pass some document field values as a parameter for subquery. It’s supported via an implicit row.fieldname parameter, and can be (but might not only) referred via local params syntax:

q=name:john&fl=name,id,depts:[subquery]&depts.q={!terms f=id v=$row.dept_id}&depts.rows=10

Here departments are retrieved per every employee in search result. We can say that it’s like SQL join ON emp.dept_id=dept.id.

Note, when a document field has multiple values they are concatenated with a comma by default. This can be changed with the local parameter foo:[subquery separator=' '], this mimics {!terms} to work smoothly with it.

To log substituted subquery request parameters, add the corresponding parameter names, as in: depts.logParamsList=q,fl,rows,row.dept_id

Cores and Collections in SolrCloud

Use foo:[subquery fromIndex=departments] to invoke subquery on another core on the same node. This is what {!join} does in a user-managed cluster. With SolrCloud, only specify its native parameters like collection, shards for subquery, for example:

q=*:*&fl=\*,foo:[subquery]&foo.q=cloud&foo.collection=departments

If subquery collection has a different unique key field name (such as foo_id instead of id in the primary collection), add the following parameters to accommodate this difference:

foo.fl=id:foo_id&foo.distrib.singlePass=true

Otherwise you’ll get NullPointerException from QueryComponent.mergeIds.

[geo] - Geospatial formatter

Formats spatial data from a spatial field using a designated format type name. Two inner parameters are required: f for the field name, and w for the format name. Example: geojson:[geo f=mySpatialField w=GeoJSON].

Normally you’ll simply be consistent in choosing the format type you want by setting the format attribute on the spatial field type to WKT or GeoJSON – see the section Spatial Search for more information. If you are consistent, it’ll come out the way you stored it. This transformer offers a convenience to transform the spatial format to something different on retrieval.

In addition, this feature is very useful with the RptWithGeometrySpatialField to avoid double-storage of the potentially large vector geometry. This transformer will detect that field type and fetch the geometry from an internal compact binary representation on disk (in docValues), and then format it as desired. As such, you needn’t mark the field as stored, which would be redundant. In a sense this double-storage between docValues and stored-value storage isn’t unique to spatial but with polygonal geometry it can be a lot of data, and furthermore you’d like to avoid storing it in a verbose format (like GeoJSON or WKT).

[features] - LTRFeatureLoggerTransformerFactory

The "LTR" prefix stands for Learning To Rank. This transformer returns the values of features and it can be used for feature extraction and feature logging.

fl=id,[features store=yourFeatureStore]

This will return the values of the features in the yourFeatureStore store.

fl=id,[features]&rq={!ltr model=yourModel}

If you use [features] together with an Learning-To-Rank reranking query then the values of the features in the reranking model (yourModel) will be returned.