Machine Learning
This section of the math expressions user guide covers machine learning functions.
Feature Scaling
Before performing machine learning operations its often necessary to scale the feature vectors so they can be compared at the same scale.
All the scaling function operate on vectors and matrices. When operating on a matrix the rows of the matrix are scaled.
Min/Max Scaling
The minMaxScale function scales a vector or matrix between a minimum and maximum value.
By default it will scale between 0 and 1 if min/max values are not provided.
Below is a simple example of min/max scaling between 0 and 1. Notice that once brought into the same scale the vectors are the same.
let(a=array(20, 30, 40, 50),
b=array(200, 300, 400, 500),
c=matrix(a, b),
d=minMaxScale(c))
This expression returns the following response:
{
"result-set": {
"docs": [
{
"d": [
[
0,
0.3333333333333333,
0.6666666666666666,
1
],
[
0,
0.3333333333333333,
0.6666666666666666,
1
]
]
},
{
"EOF": true,
"RESPONSE_TIME": 0
}
]
}
}
Standardization
The standardize function scales a vector so that it has a mean of 0 and a standard deviation of 1.
Standardization can be used with machine learning algorithms, such as
Support Vector Machine (SVM), that perform better
when the data has a normal distribution.
let(a=array(20, 30, 40, 50),
b=array(200, 300, 400, 500),
c=matrix(a, b),
d=standardize(c))
This expression returns the following response:
{
"result-set": {
"docs": [
{
"d": [
[
-1.161895003862225,
-0.3872983346207417,
0.3872983346207417,
1.161895003862225
],
[
-1.1618950038622249,
-0.38729833462074165,
0.38729833462074165,
1.1618950038622249
]
]
},
{
"EOF": true,
"RESPONSE_TIME": 17
}
]
}
}
Unit Vectors
The unitize function scales vectors to a magnitude of 1. A vector with a
magnitude of 1 is known as a unit vector. Unit vectors are preferred when the vector math deals
with vector direction rather than magnitude.
let(a=array(20, 30, 40, 50),
b=array(200, 300, 400, 500),
c=matrix(a, b),
d=unitize(c))
This expression returns the following response:
{
"result-set": {
"docs": [
{
"d": [
[
0.2721655269759087,
0.40824829046386296,
0.5443310539518174,
0.6804138174397716
],
[
0.2721655269759087,
0.4082482904638631,
0.5443310539518174,
0.6804138174397717
]
]
},
{
"EOF": true,
"RESPONSE_TIME": 6
}
]
}
}
Distance and Distance Measures
The distance function computes the distance for two numeric arrays or a distance matrix for the columns of a matrix.
There are five distance measure functions that return a function that performs the actual distance calculation:
euclidean(default)manhattancanberraearthMovershaversineMeters(Geospatial distance measure)
The distance measure functions can be used with all machine learning functions that support distance measures.
Below is an example for computing Euclidean distance for two numeric arrays:
let(a=array(20, 30, 40, 50),
b=array(21, 29, 41, 49),
c=distance(a, b))
This expression returns the following response:
{
"result-set": {
"docs": [
{
"c": 2
},
{
"EOF": true,
"RESPONSE_TIME": 0
}
]
}
}
Below the distance is calculated using Manahattan distance.
let(a=array(20, 30, 40, 50),
b=array(21, 29, 41, 49),
c=distance(a, b, manhattan()))
This expression returns the following response:
{
"result-set": {
"docs": [
{
"c": 4
},
{
"EOF": true,
"RESPONSE_TIME": 1
}
]
}
}
Below is an example for computing a distance matrix for columns of a matrix:
let(a=array(20, 30, 40),
b=array(21, 29, 41),
c=array(31, 40, 50),
d=matrix(a, b, c),
c=distance(d))
This expression returns the following response:
{
"result-set": {
"docs": [
{
"e": [
[
0,
15.652475842498529,
34.07345007480164
],
[
15.652475842498529,
0,
18.547236990991408
],
[
34.07345007480164,
18.547236990991408,
0
]
]
},
{
"EOF": true,
"RESPONSE_TIME": 24
}
]
}
}
K-Means Clustering
The kmeans functions performs k-means clustering of the rows of a matrix.
Once the clustering has been completed there are a number of useful functions available
for examining the clusters and centroids.
The examples below cluster term vectors. The section Text Analysis and Term Vectors offers a full explanation of these features.
Centroid Features
In the example below the kmeans function is used to cluster a result set from the Enron email data-set
and then the top features are extracted from the cluster centroids.
let(a=select(random(enron, q="body:oil", rows="500", fl="id, body"),
id,
analyze(body, body_bigram) as terms),
b=termVectors(a, maxDocFreq=.10, minDocFreq=.05, minTermLength=14, exclude="_,copyright"),
c=kmeans(b, 5),
d=getCentroids(c),
e=topFeatures(d, 5))
Let’s look at what data is assigned to each variable:
| 1 | a: The random function returns a sample of 500 documents from the "enron"
collection that match the query "body:oil". The select function selects the id and
and annotates each tuple with the analyzed bigram terms from the body field. |
| 2 | b: The termVectors function creates a TF-IDF term vector matrix from the
tuples stored in variable a. Each row in the matrix represents a document. The columns of the matrix
are the bigram terms that were attached to each tuple. |
| 3 | c: The kmeans function clusters the rows of the matrix into 5 clusters. The k-means clustering is performed using the Euclidean distance measure. |
| 4 | d: The getCentroids function returns a matrix of cluster centroids. Each row in the matrix is a centroid
from one of the 5 clusters. The columns of the matrix are the same bigrams terms of the term vector matrix. |
| 5 | e: The topFeatures function returns the column labels for the top 5 features of each centroid in the matrix.
This returns the top 5 bigram terms for each centroid. |
This expression returns the following response:
{
"result-set": {
"docs": [
{
"e": [
[
"enron enronxgate",
"north american",
"energy services",
"conference call",
"power generation"
],
[
"financial times",
"chief financial",
"financial officer",
"exchange commission",
"houston chronicle"
],
[
"southern california",
"california edison",
"public utilities",
"utilities commission",
"rate increases"
],
[
"rolling blackouts",
"public utilities",
"electricity prices",
"federal energy",
"price controls"
],
[
"california edison",
"regulatory commission",
"southern california",
"federal energy",
"power generators"
]
]
},
{
"EOF": true,
"RESPONSE_TIME": 982
}
]
}
}
Cluster Features
The example below examines the top features of a specific cluster. This example uses the same techniques as the centroids example but the top features are extracted from a cluster rather than the centroids.
let(a=select(random(collection3, q="body:oil", rows="500", fl="id, body"),
id,
analyze(body, body_bigram) as terms),
b=termVectors(a, maxDocFreq=.09, minDocFreq=.03, minTermLength=14, exclude="_,copyright"),
c=kmeans(b, 25),
d=getCluster(c, 0),
e=topFeatures(d, 4))
| 1 | The getCluster function returns a cluster by its index. Each cluster is a matrix containing term vectors
that have been clustered together based on their features. |
| 2 | The topFeatures function is used to extract the top 4 features from each term vector
in the cluster. |
This expression returns the following response:
{
"result-set": {
"docs": [
{
"e": [
[
"electricity board",
"maharashtra state",
"power purchase",
"state electricity",
"reserved enron"
],
[
"electricity board",
"maharashtra state",
"state electricity",
"purchase agreement",
"independent power"
],
[
"maharashtra state",
"reserved enron",
"federal government",
"state government",
"dabhol project"
],
[
"purchase agreement",
"power purchase",
"electricity board",
"maharashtra state",
"state government"
],
[
"investment grade",
"portland general",
"general electric",
"holding company",
"transmission lines"
],
[
"state government",
"state electricity",
"purchase agreement",
"electricity board",
"maharashtra state"
],
[
"electricity board",
"state electricity",
"energy management",
"maharashtra state",
"energy markets"
],
[
"electricity board",
"maharashtra state",
"state electricity",
"state government",
"second quarter"
]
]
},
{
"EOF": true,
"RESPONSE_TIME": 978
}
]
}
}
Multi K-Means Clustering
K-means clustering will produce different results depending on the initial placement of the centroids. K-means is fast enough that multiple trials can be performed and the best outcome selected.
The multiKmeans function runs the k-means clustering algorithm for a given number of trials and selects the
best result based on which trial produces the lowest intra-cluster variance.
The example below is identical to centroids example except that it uses multiKmeans with 100 trials,
rather than a single trial of the kmeans function.
let(a=select(random(collection3, q="body:oil", rows="500", fl="id, body"),
id,
analyze(body, body_bigram) as terms),
b=termVectors(a, maxDocFreq=.09, minDocFreq=.03, minTermLength=14, exclude="_,copyright"),
c=multiKmeans(b, 5, 100),
d=getCentroids(c),
e=topFeatures(d, 5))
This expression returns the following response:
{
"result-set": {
"docs": [
{
"e": [
[
"enron enronxgate",
"energy trading",
"energy markets",
"energy services",
"unleaded gasoline"
],
[
"maharashtra state",
"electricity board",
"state electricity",
"energy trading",
"chief financial"
],
[
"price controls",
"electricity prices",
"francisco chronicle",
"wholesale electricity",
"power generators"
],
[
"southern california",
"california edison",
"public utilities",
"francisco chronicle",
"utilities commission"
],
[
"california edison",
"power purchases",
"system operator",
"term contracts",
"independent system"
]
]
},
{
"EOF": true,
"RESPONSE_TIME": 1182
}
]
}
}
Fuzzy K-Means Clustering
The fuzzyKmeans function is a soft clustering algorithm which
allows vectors to be assigned to more then one cluster. The fuzziness parameter
is a value between 1 and 2 that determines how fuzzy to make the cluster assignment.
After the clustering has been performed the getMembershipMatrix function can be called
on the clustering result to return a matrix describing which clusters each vector belongs to.
There is a row in the matrix for each vector that was clustered. There is a column in the matrix
for each cluster. The values in the columns are the probability that the vector belonged to the specific
cluster.
A simple example will make this more clear. In the example below 300 documents are analyzed and
then turned into a term vector matrix. Then the fuzzyKmeans function clusters the
term vectors into 12 clusters with a fuzziness factor of 1.25.
let(a=select(random(collection3, q="body:oil", rows="300", fl="id, body"),
id,
analyze(body, body_bigram) as terms),
b=termVectors(a, maxDocFreq=.09, minDocFreq=.03, minTermLength=14, exclude="_,copyright"),
c=fuzzyKmeans(b, 12, fuzziness=1.25),
d=getMembershipMatrix(c),
e=rowAt(d, 0),
f=precision(e, 5))
| 1 | The getMembershipMatrix function is used to return the membership matrix; |
| 2 | and the first row of membership matrix is retrieved with the rowAt function. |
| 3 | The precision function is then applied to the first row
of the matrix to make it easier to read. |
This expression returns a single vector representing the cluster membership probabilities for the first term vector. Notice that the term vector has the highest association with the 12th cluster, but also has significant associations with the 3rd, 5th, 6th and 7th clusters:
{
"result-set": {
"docs": [
{
"f": [
0,
0,
0.178,
0,
0.17707,
0.17775,
0.16214,
0,
0,
0,
0,
0.30504
]
},
{
"EOF": true,
"RESPONSE_TIME": 2157
}
]
}
}
K-Nearest Neighbor (KNN)
The knn function searches the rows of a matrix for the
k-nearest neighbors of a search vector. The knn function
returns a matrix of the k-nearest neighbors.
The knn function supports changing of the distance measure by providing one of these
distance measure functions as the fourth parameter:
euclidean(Default)manhattancanberraearthMovers
The example below builds on the clustering examples to demonstrate the knn function.
let(a=select(random(collection3, q="body:oil", rows="500", fl="id, body"),
id,
analyze(body, body_bigram) as terms),
b=termVectors(a, maxDocFreq=.09, minDocFreq=.03, minTermLength=14, exclude="_,copyright"),
c=multiKmeans(b, 5, 100),
d=getCentroids(c),
e=rowAt(d, 0),
g=knn(b, e, 3),
h=topFeatures(g, 4))
| 1 | In the example, the centroids matrix is set to variable d. |
| 2 | The first centroid vector is selected from the matrix with the rowAt function. |
| 3 | Then the knn function is used to find the 3 nearest neighbors
to the centroid vector in the term vector matrix (variable b). |
| 4 | The topFeatures function is used to request the top 4 featurs of the term vectors in the knn matrix. |
The knn function returns a matrix with the 3 nearest neighbors based on the
default distance measure which is euclidean. Finally, the top 4 features
of the term vectors in the nearest neighbor matrix are returned:
{
"result-set": {
"docs": [
{
"h": [
[
"california power",
"electricity supply",
"concerned about",
"companies like"
],
[
"maharashtra state",
"california power",
"electricity board",
"alternative energy"
],
[
"electricity board",
"maharashtra state",
"state electricity",
"houston chronicle"
]
]
},
{
"EOF": true,
"RESPONSE_TIME": 1243
}
]
}
}
K-Nearest Neighbor Regression
K-nearest neighbor regression is a non-linear, multi-variate regression method. Knn regression is a lazy learning technique which means it does not fit a model to the training set in advance. Instead the entire training set of observations and outcomes are held in memory and predictions are made by averaging the outcomes of the k-nearest neighbors.
The knnRegress function prepares the training set for use with the predict function.
Below is an example of the knnRegress function. In this example 10,000 random samples
are taken, each containing the variables filesize_d, service_d and response_d. The pairs of
filesize_d and service_d will be used to predict the value of response_d.
let(samples=random(collection1, q="*:*", rows="10000", fl="filesize_d, service_d, response_d"),
filesizes=col(samples, filesize_d),
serviceLevels=col(samples, service_d),
outcomes=col(samples, response_d),
observations=transpose(matrix(filesizes, serviceLevels)),
lazyModel=knnRegress(observations, outcomes , 5))
This expression returns the following response. Notice that knnRegress returns a tuple describing the regression inputs:
{
"result-set": {
"docs": [
{
"lazyModel": {
"features": 2,
"robust": false,
"distance": "EuclideanDistance",
"observations": 10000,
"scale": false,
"k": 5
}
},
{
"EOF": true,
"RESPONSE_TIME": 170
}
]
}
}
Prediction and Residuals
The output of knnRegress can be used with the predict function like other regression models.
In the example below the predict function is used to predict results for the original training
data. The sumSq of the residuals is then calculated.
let(samples=random(collection1, q="*:*", rows="10000", fl="filesize_d, service_d, response_d"),
filesizes=col(samples, filesize_d),
serviceLevels=col(samples, service_d),
outcomes=col(samples, response_d),
observations=transpose(matrix(filesizes, serviceLevels)),
lazyModel=knnRegress(observations, outcomes , 5),
predictions=predict(lazyModel, observations),
residuals=ebeSubtract(outcomes, predictions),
sumSqErr=sumSq(residuals))
This expression returns the following response:
{
"result-set": {
"docs": [
{
"sumSqErr": 1920290.1204126712
},
{
"EOF": true,
"RESPONSE_TIME": 3796
}
]
}
}
Setting Feature Scaling
If the features in the observation matrix are not in the same scale then the larger features
will carry more weight in the distance calculation then the smaller features. This can greatly
impact the accuracy of the prediction. The knnRegress function has a scale parameter which
can be set to true to automatically scale the features in the same range.
The example below shows knnRegress with feature scaling turned on.
Notice that when feature scaling is turned on the sumSqErr in the output is much lower.
This shows how much more accurate the predictions are when feature scaling is turned on in
this particular example. This is because the filesize_d feature is significantly larger then
the service_d feature.
let(samples=random(collection1, q="*:*", rows="10000", fl="filesize_d, service_d, response_d"),
filesizes=col(samples, filesize_d),
serviceLevels=col(samples, service_d),
outcomes=col(samples, response_d),
observations=transpose(matrix(filesizes, serviceLevels)),
lazyModel=knnRegress(observations, outcomes , 5, scale=true),
predictions=predict(lazyModel, observations),
residuals=ebeSubtract(outcomes, predictions),
sumSqErr=sumSq(residuals))
This expression returns the following response:
{
"result-set": {
"docs": [
{
"sumSqErr": 4076.794951120683
},
{
"EOF": true,
"RESPONSE_TIME": 3790
}
]
}
}
Setting Robust Regression
The default prediction approach is to take the mean of the outcomes of the k-nearest
neighbors. If the outcomes contain outliers the mean value can be skewed. Setting
the robust parameter to true will take the median outcome of the k-nearest neighbors.
This provides a regression prediction that is robust to outliers.
Setting the Distance Measure
The distance measure can be changed for the k-nearest neighbor search by adding a distance measure
function to the knnRegress parameters. Below is an example using manhattan distance.
let(samples=random(collection1, q="*:*", rows="10000", fl="filesize_d, service_d, response_d"),
filesizes=col(samples, filesize_d),
serviceLevels=col(samples, service_d),
outcomes=col(samples, response_d),
observations=transpose(matrix(filesizes, serviceLevels)),
lazyModel=knnRegress(observations, outcomes, 5, manhattan(), scale=true),
predictions=predict(lazyModel, observations),
residuals=ebeSubtract(outcomes, predictions),
sumSqErr=sumSq(residuals))
This expression returns the following response:
{
"result-set": {
"docs": [
{
"sumSqErr": 4761.221942288098
},
{
"EOF": true,
"RESPONSE_TIME": 3571
}
]
}
}