Extended DisMax (eDisMax) Query Parser

The Extended DisMax (eDisMax) query parser is an improved version of the DisMax Query Parser.

In addition to supporting all the DisMax query parser parameters, Extended DisMax:

  • supports Standard Query Parser syntax such as (non-exhaustive list):

    • boolean operators such as AND (+, &&), OR (||), NOT (-).

    • optionally treats lowercase "and" and "or" as "AND" and "OR" in Lucene syntax mode

    • optionally allows embedded queries using other query parsers or functions

  • includes improved smart partial escaping in the case of syntax errors; fielded queries, +/-, and phrase queries are still supported in this mode.

  • improves proximity boosting by using word shingles; you do not need the query to match all words in the document before proximity boosting is applied.

  • includes advanced stopword handling: stopwords are not required in the mandatory part of the query but are still used in the proximity boosting part. If a query consists of all stopwords, such as "to be or not to be", then all words are required.

  • includes improved boost function: in Extended DisMax, the boost function is a multiplier rather than an addend, improving your boost results; the additive boost functions of DisMax (bf and bq) are also supported.

  • supports pure negative nested queries: queries such as +foo (-foo) will match all documents.

  • lets you specify which fields the end user is allowed to query, and to disallow direct fielded searches.

Extended DisMax Parameters

In addition to all the DisMax parameters, Extended DisMax includes these query parameters:

sow

Split on whitespace. If set to true, text analysis is invoked separately for each individual whitespace-separated term. The default is false; whitespace-separated term sequences will be provided to text analysis in one shot, enabling proper function of analysis filters that operate over term sequences, e.g., multi-word synonyms and shingles.

mm

Minimum should match. See the DisMax mm parameter for a description of mm. The default eDisMax mm value differs from that of DisMax:

  • The default mm value is 0%:

    • if the query contains an explicit operator other than "AND" ("-", "+", "OR", "NOT"); or

    • if q.op is "OR" or is not specified.

  • The default mm value is 100% if q.op is "AND" and the query does not contain any explicit operators other than "AND".

mm.autoRelax

If true, the number of clauses required will automatically be relaxed if a clause is removed (by e.g., stopwords filter) from some but not all qf fields. Use this parameter as a workaround if you experience that queries return zero hits due to uneven stopword removal between the qf fields.

Note that relaxing mm may cause undesired side effects, such as hurting the precision of the search, depending on the nature of your index content.

boost

A multivalued list of strings parsed as functions whose results will be multiplied into the score from the main query for all matching documents. This parameter is shorthand for wrapping the query produced by eDisMax using the BoostQParserPlugin.

These two examples are equivalent:

q={!edismax qf=name}ipod
boost=div(1,sum(1,price))
q={!boost b=div(1,sum(1,price)) v=$qq}
qq={!edismax qf=name}ipod
lowercaseOperators

A Boolean parameter indicating if lowercase "and" and "or" should be treated the same as operators "AND" and "OR". Defaults to false.

pf

Phrase Fields. Once the list of matching documents has been identified using the fq and qf parameters, the pf parameter can be used to "boost" the score of documents in cases where all of the terms in the q parameter appear in close proximity.

The format is the same as that used by the qf parameter: a list of fields and "boosts" to associate with each of them when making phrase queries out of the entire q parameter.

ps

Phrase Slop. The default amount of slop - distance between terms - on phrase queries built with pf, pf2 and/or pf3 fields (affects boosting). See also the section Using 'Slop' below.

pf2

A multivalued list of fields with optional weights. Similar to pf, but based on word pair shingles.

ps2

This is similar to ps but overrides the slop factor used for pf2. If not specified, `ps is used.

pf3

A multivalued list of fields with optional weights, based on triplets of word shingles. Similar to pf, except that instead of building a phrase per field out of all the words in the input, it builds a set of phrases for each field out of word triplet shingles.

ps3

This is similar to ps but overrides the slop factor used for pf3. If not specified, ps is used.

stopwords

A Boolean parameter indicating if the StopFilterFactory configured in the query analyzer should be respected when parsing the query. If this is set to false, then the StopFilterFactory in the query analyzer is ignored.

uf

Specifies which schema fields the end user is allowed to explicitly query and to toggle whether embedded Solr queries are supported. This parameter supports wildcards. Multiple fields must be separated by a space.

The default is to allow all fields and no embedded Solr queries, equivalent to uf=* -_query_.

  • To allow only title field, use uf=title.

  • To allow title and all fields ending with '_s', use uf=title *_s.

  • To allow all fields except title, use uf=* -title.

  • To disallow all fielded searches, use uf=-*.

  • To allow embedded Solr queries (e.g., _query_:"…​" or _val_:"…​" or {!lucene …​}), you must expressly enable this by referring to the magic field _query_ in uf.

Field Aliasing using Per-Field qf Overrides

Per-field overrides of the qf parameter may be specified to provide 1-to-many aliasing from field names specified in the query string, to field names used in the underlying query. By default, no aliasing is used and field names specified in the query string are treated as literal field names in the index.

Examples of eDisMax Queries

All of the sample URLs in this section assume you are running Solr’s "techproducts" example:

bin/solr start -e techproducts

Boost the result of the query term "hello" based on the document’s popularity:

http://localhost:8983/solr/techproducts/select?defType=edismax&q=hello&pf=text&qf=text&boost=popularity

Search for iPods OR video:

http://localhost:8983/solr/techproducts/select?defType=edismax&q=ipod+OR+video

Search across multiple fields, specifying (via boosts) how important each field is relative each other:

http://localhost:8983/solr/techproducts/select?q=video&defType=edismax&qf=features^20.0+text^0.3

You can boost results that have a field that matches a specific value:

http://localhost:8983/solr/techproducts/select?q=video&defType=edismax&qf=features^20.0+text^0.3&bq=cat:electronics^5.0

Using the mm parameter, 1 and 2 word queries require that all of the optional clauses match, but for queries with three or more clauses one missing clause is allowed:

http://localhost:8983/solr/techproducts/select?q=belkin+ipod&defType=edismax&mm=2
http://localhost:8983/solr/techproducts/select?q=belkin+ipod+gibberish&defType=edismax&mm=2
http://localhost:8983/solr/techproducts/select?q=belkin+ipod+apple&defType=edismax&mm=2

In the example below, we see a per-field override of the qf parameter being used to alias "name" in the query string to either the “last_name” and “first_name” fields:

defType=edismax
q=sysadmin name:Mike
qf=title text last_name first_name
f.name.qf=last_name first_name

Using 'Slop'

Dismax and Edismax can run queries against all query fields, and also run a query in the form of a phrase against the phrase fields (this will work only for boosting documents, not actually for matching). However, that phrase query can have a 'slop,' which is the distance between the terms of the query while still considering it a phrase match. For example:

q=foo bar
qf=field1^5 field2^10
pf=field1^50 field2^20
defType=dismax

With these parameters, the DisMax Query Parser generates a query that looks something like this:

 (+(field1:foo^5 OR field2:foo^10) AND (field1:bar^5 OR field2:bar^10))

But it also generates another query that will only be used for boosting results:

field1:"foo bar"^50 OR field2:"foo bar"^20

Thus, any document that has the terms "foo" and "bar" will match; however if some of those documents have both of the terms as a phrase, it will score much higher because it’s more relevant.

If you add the parameter ps (phrase slop), the second query will instead be:

ps=10 field1:"foo bar"~10^50 OR field2:"foo bar"~10^20

This means that if the terms "foo" and "bar" appear in the document with less than 10 terms between each other, the phrase will match. For example the doc that says:

*Foo* term1 term2 term3 *bar*

will match the phrase query.

How does one use phrase slop? Usually it is configured in the request handler (in solrconfig).

With query slop (qs) the concept is similar, but it applies to explicit phrase queries from the user. For example, if you want to search for a name, you could enter:

q="Hans Anderson"

A document that contains "Hans Anderson" will match, but a document that contains the middle name "Christian" or where the name is written with the last name first ("Anderson, Hans") won’t. For those cases one could configure the query field qs, so that even if the user searches for an explicit phrase query, a slop is applied.

Finally, in addition to the phrase fields (pf) parameter, edismax also supports the pf2 and pf3 parameters, for fields over which to create bigram and trigram phrase queries. The phrase slop for these parameters' queries can be specified using the ps2 and ps3 parameters, respectively. If you use pf2/pf3 but not ps2/ps3, then the phrase slop for these parameters' queries will be taken from the ps parameter, if any.

Synonyms Expansion in Phrase Queries with Slop

When a phrase query with slop (e.g., pf with ps) triggers synonym expansions, a separate clause will be generated for each combination of synonyms. For example, with configured synonyms dog,canine and cat,feline, the query "dog chased cat" will generate the following phrase query clauses:

  • "dog chased cat"

  • "canine chased cat"

  • "dog chased feline"

  • "canine chased feline"