Kerberos Authentication Plugin

security.json

The Solr authentication model uses a file called security.json. A description of this file and how it is created and maintained is covered in the section Authentication and Authorization Plugins. If this file is created after an initial startup of Solr, a restart of each node of the system is required.

Service Principals and Keytab Files

Each Solr node must have a service principal registered with the Key Distribution Center (KDC). The Kerberos plugin uses SPNego to negotiate authentication.

Using HTTP/host1@YOUR-DOMAIN.ORG, as an example of a service principal:

Multiple Solr nodes on the same host may have the same service principal, since the host name is common to them all.

Along with the service principal, each Solr node needs a keytab file which should contain the credentials of the service principal used. A keytab file contains encrypted credentials to support passwordless logins while obtaining Kerberos tickets from the KDC. For each Solr node, the keytab file should be kept in a secure location and not shared with users of the cluster.

Since a Solr cluster requires internode communication, each node must also be able to make Kerberos enabled requests to other nodes. By default, Solr uses the same service principal and keytab as a 'client principal' for internode communication. You may configure a distinct client principal explicitly, but doing so is not recommended and is not covered in the examples below.

Kerberized ZooKeeper

When setting up a kerberized SolrCloud cluster, it is recommended to enable Kerberos security for ZooKeeper as well.

In such a setup, the client principal used to authenticate requests with ZooKeeper can be shared for internode communication as well. This has the benefit of not needing to renew the ticket granting tickets (TGTs) separately, since the ZooKeeper client used by Solr takes care of this. To achieve this, a single JAAS configuration (with the app name as Client) can be used for the Kerberos plugin as well as for the ZooKeeper client.

See the ZooKeeper Configuration section below for an example of starting ZooKeeper in Kerberos mode.

Browser Configuration

In order for your browser to access the Solr Admin UI after enabling Kerberos authentication, it must be able to negotiate with the Kerberos authenticator service to allow you access. Each browser supports this differently, and some (like Chrome) do not support it at all. If you see 401 errors when trying to access the Solr Admin UI after enabling Kerberos authentication, it’s likely your browser has not been configured properly to know how or where to negotiate the authentication request.

Detailed information on how to set up your browser is beyond the scope of this documentation; please see your system administrators for Kerberos for details on how to configure your browser.

Get Service Principals and Keytabs

Before configuring Solr, make sure you have a Kerberos service principal for each Solr host and ZooKeeper (if ZooKeeper has not already been configured) available in the KDC server, and generate a keytab file as shown below.

This example assumes the hostname is 192.168.0.107 and your home directory is /home/foo/. This example should be modified for your own environment.

root@kdc:/# kadmin.local
Authenticating as principal foo/admin@EXAMPLE.COM with password.

kadmin.local:  addprinc HTTP/192.168.0.107
WARNING: no policy specified for HTTP/192.168.0.107@EXAMPLE.COM; defaulting to no policy
Enter password for principal "HTTP/192.168.0.107@EXAMPLE.COM":
Re-enter password for principal "HTTP/192.168.0.107@EXAMPLE.COM":
Principal "HTTP/192.168.0.107@EXAMPLE.COM" created.

kadmin.local:  ktadd -k /tmp/107.keytab HTTP/192.168.0.107
Entry for principal HTTP/192.168.0.107 with kvno 2, encryption type aes256-cts-hmac-sha1-96 added to keytab WRFILE:/tmp/107.keytab.
Entry for principal HTTP/192.168.0.107 with kvno 2, encryption type arcfour-hmac added to keytab WRFILE:/tmp/107.keytab.
Entry for principal HTTP/192.168.0.107 with kvno 2, encryption type des3-cbc-sha1 added to keytab WRFILE:/tmp/108.keytab.
Entry for principal HTTP/192.168.0.107 with kvno 2, encryption type des-cbc-crc added to keytab WRFILE:/tmp/107.keytab.

kadmin.local:  quit

Copy the keytab file from the KDC server’s /tmp/107.keytab location to the Solr host at /keytabs/107.keytab. Repeat this step for each Solr node.

You might need to take similar steps to create a ZooKeeper service principal and keytab if it has not already been set up. In that case, the example below shows a different service principal for ZooKeeper, so the above might be repeated with zookeeper/host1 as the service principal for one of the nodes

ZooKeeper Configuration

If you are using a ZooKeeper that has already been configured to use Kerberos, you can skip the ZooKeeper-related steps shown here.

Since ZooKeeper manages the communication between nodes in a SolrCloud cluster, it must also be able to authenticate with each node of the cluster. Configuration requires setting up a service principal for ZooKeeper, defining a JAAS configuration file and instructing ZooKeeper to use both of those items.

The first step is to create a file java.env in ZooKeeper’s conf directory and add the following to it, as in this example:

export JVMFLAGS="-Djava.security.auth.login.config=/etc/zookeeper/conf/jaas-client.conf"

The JAAS configuration file should contain the following parameters. Be sure to change the principal and keyTab path as appropriate. The file must be located in the path defined in the step above, with the filename specified.

Server {
 com.sun.security.auth.module.Krb5LoginModule required
  useKeyTab=true
  keyTab="/keytabs/zkhost1.keytab"
  storeKey=true
  doNotPrompt=true
  useTicketCache=false
  debug=true
  principal="zookeeper/host1@EXAMPLE.COM";
};

Finally, add the following lines to the ZooKeeper configuration file zoo.cfg:

authProvider.1=org.apache.zookeeper.server.auth.SASLAuthenticationProvider
jaasLoginRenew=3600000

Once all of the pieces are in place, start ZooKeeper with the following parameter pointing to the JAAS configuration file:

bin/zkServer.sh start -Djava.security.auth.login.config=/etc/zookeeper/conf/jaas-client.conf

Create security.json

Create the file security.json with the contents:

{"authentication": {"class": "org.apache.solr.security.KerberosPlugin"}}

Then use the bin/solr zk command to upload the file:

>bin/solr zk cp ./security.json zk:security.json -z localhost:2181

If you are using Solr in standalone mode, you need to create the security.json file and put it in your $SOLR_HOME directory.

More details on how to use a /security.json file in Solr are available in the section Authentication and Authorization Plugins.

Define a JAAS Configuration File

The JAAS configuration file defines the properties to use for authentication, such as the service principal and the location of the keytab file. Other properties can also be set to ensure ticket caching and other features.

The following example can be copied and modified slightly for your environment. The location of the file can be anywhere on the server, but it will be referenced when starting Solr so it must be readable on the filesystem. The JAAS file may contain multiple sections for different users, but each section must have a unique name so it can be uniquely referenced in each application.

In the below example, we have created a JAAS configuration file with the name and path of /home/foo/jaas-client.conf. We will use this name and path when we define the Solr start parameters in the next section. Note that the client principal here is the same as the service principal. This will be used to authenticate internode requests and requests to ZooKeeper. Make sure to use the correct principal hostname and the keyTab file path.

Client {
  com.sun.security.auth.module.Krb5LoginModule required
  useKeyTab=true
  keyTab="/keytabs/107.keytab"
  storeKey=true
  useTicketCache=true
  debug=true
  principal="HTTP/192.168.0.107@EXAMPLE.COM";
};

The first line of this file defines the section name, which will be used with the solr.kerberos.jaas.appname parameter, defined below.

The main properties we are concerned with are the keyTab and principal properties, but there are others which may be required for your environment. The javadocs for the Krb5LoginModule (the class that’s being used and is called in the second line above) provide a good outline of the available properties, but for reference the ones in use in the above example are explained here:

Solr Startup Parameters

While starting up Solr, the following host-specific parameters need to be passed. These parameters can be passed at the command line with the bin/solr start command (see Solr Control Script Reference for details on how to pass system parameters) or defined in bin/solr.in.sh or bin/solr.in.cmd as appropriate for your operating system.

Here is an example that could be added to bin/solr.in.sh. Make sure to change this example to use the right hostname and the keytab file path.

SOLR_AUTH_TYPE="kerberos"
SOLR_AUTHENTICATION_OPTS="-Djava.security.auth.login.config=/home/foo/jaas-client.conf -Dsolr.kerberos.cookie.domain=192.168.0.107 -Dsolr.kerberos.cookie.portaware=true -Dsolr.kerberos.principal=HTTP/192.168.0.107@EXAMPLE.COM -Dsolr.kerberos.keytab=/keytabs/107.keytab"

Using Delegation Tokens

The Kerberos plugin can be configured to use delegation tokens, which allow an application to reuse the authentication of an end-user or another application.

There are a few use cases for Solr where this might be helpful:

To enable delegation tokens, several parameters must be defined. These parameters can be passed at the command line with the bin/solr start command (see Solr Control Script Reference for details on how to pass system parameters) or defined in bin/solr.in.sh or bin/solr.in.cmd as appropriate for your operating system.

Start Solr

Once the configuration is complete, you can start Solr with the bin/solr script, as in the example below, which is for users in SolrCloud mode only. This example assumes you modified bin/solr.in.sh or bin/solr.in.cmd, with the proper values, but if you did not, you would pass the system parameters along with the start command. Note you also need to customize the -z property as appropriate for the location of your ZooKeeper nodes.

bin/solr -c -z server1:2181,server2:2181,server3:2181/solr

Test the Configuration

Delegation Tokens with SolrJ

Delegation tokens are also supported with SolrJ, in the following ways:

Sample code to get a delegation token:

private String getDelegationToken(final String renewer, final String user, HttpSolrClient solrClient) throws Exception {
    DelegationTokenRequest.Get get = new DelegationTokenRequest.Get(renewer) {
      @Override
      public SolrParams getParams() {
        ModifiableSolrParams params = new ModifiableSolrParams(super.getParams());
        params.set("user", user);
        return params;
      }
    };
    DelegationTokenResponse.Get getResponse = get.process(solrClient);
    return getResponse.getDelegationToken();
  }

To create a HttpSolrClient that uses delegation tokens:

HttpSolrClient client = new HttpSolrClient.Builder("http://localhost:8983/solr").withKerberosDelegationToken(token).build();

To create a CloudSolrClient that uses delegation tokens:

CloudSolrClient client = new CloudSolrClient.Builder(Collections.singletonList("localhost:2181"),Optional.empty())
                .withLBHttpSolrClientBuilder(new LBHttpSolrClient.Builder()
                    .withResponseParser(client.getParser())
                    .withHttpSolrClientBuilder(
                        new HttpSolrClient.Builder()
                            .withKerberosDelegationToken(token)
                    ))
                        .build();