Although Solr comes bundled with Apache ZooKeeper, you should consider yourself discouraged from using this internal ZooKeeper in production.
Shutting down a redundant Solr instance will also shut down its ZooKeeper server, which might not be quite so redundant. Because a ZooKeeper ensemble must have a quorum of more than half its servers running at any given time, this can be a problem.
The solution to this problem is to set up an external ZooKeeper ensemble. Fortunately, while this process can seem intimidating due to the number of powerful options, setting up a simple ensemble is actually quite straightforward, as described below.
"For a ZooKeeper service to be active, there must be a majority of non-failing machines that can communicate with each other. To create a deployment that can tolerate the failure of F machines, you should count on deploying 2xF+1 machines. Thus, a deployment that consists of three machines can handle one failure, and a deployment of five machines can handle two failures. Note that a deployment of six machines can only handle two failures since three machines is not a majority.
For this reason, ZooKeeper deployments are usually made up of an odd number of machines."
http://zookeeper.apache.org/doc/r3.4.11/zookeeperAdmin.html
When planning how many ZooKeeper nodes to configure, keep in mind that the main principle for a ZooKeeper ensemble is maintaining a majority of servers to serve requests. This majority is also called a quorum.
It is generally recommended to have an odd number of ZooKeeper servers in your ensemble, so a majority is maintained.
For example, if you only have two ZooKeeper nodes and one goes down, 50% of available servers is not a majority, so ZooKeeper will no longer serve requests. However, if you have three ZooKeeper nodes and one goes down, you have 66% of available servers available, and ZooKeeper will continue normally while you repair the one down node. If you have 5 nodes, you could continue operating with two down nodes if necessary.
More information on ZooKeeper clusters is available from the ZooKeeper documentation at http://zookeeper.apache.org/doc/r3.4.11/zookeeperAdmin.html#sc_zkMulitServerSetup.
Download Apache ZooKeeper
The first step in setting up Apache ZooKeeper is, of course, to download the software. It’s available from http://zookeeper.apache.org/releases.html.
|
When using stand-alone ZooKeeper, you need to take care to keep your version of ZooKeeper updated with the latest version distributed with Solr. Since you are using it as a stand-alone application, it does not get upgraded when you upgrade Solr. Solr currently uses Apache ZooKeeper v3.4.11. |
Setting Up a Single ZooKeeper
Create the Instance
Creating the instance is a simple matter of extracting the files into a specific target directory. The actual directory itself doesn’t matter, as long as you know where it is, and where you’d like to have ZooKeeper store its internal data.
Configure the Instance
The next step is to configure your ZooKeeper instance. To do that, create the following file: <ZOOKEEPER_HOME>/conf/zoo.cfg. To this file, add the following information:
tickTime=2000
dataDir=/var/lib/zookeeper
clientPort=2181The parameters are as follows:
tickTime-
Part of what ZooKeeper does is to determine which servers are up and running at any given time, and the minimum session time out is defined as two "ticks". The
tickTimeparameter specifies, in miliseconds, how long each tick should be. dataDir-
This is the directory in which ZooKeeper will store data about the cluster. This directory should start out empty.
clientPort-
This is the port on which Solr will access ZooKeeper.
Once this file is in place, you’re ready to start the ZooKeeper instance.
Run the Instance
To run the instance, you can simply use the ZOOKEEPER_HOME/bin/zkServer.sh script provided, as with this command: zkServer.sh start
Again, ZooKeeper provides a great deal of power through additional configurations, but delving into them is beyond the scope of this tutorial. For more information, see the ZooKeeper Getting Started page. For this example, however, the defaults are fine.
Point Solr at the Instance
Pointing Solr at the ZooKeeper instance you’ve created is a simple matter of using the -z parameter when using the bin/solr script. For example, in order to point the Solr instance to the ZooKeeper you’ve started on port 2181, this is what you’d need to do:
Starting cloud example with ZooKeeper already running at port 2181 (with all other defaults):
bin/solr start -e cloud -z localhost:2181 -nopromptAdd a node pointing to an existing ZooKeeper at port 2181:
bin/solr start -cloud -s <path to solr home for new node> -p 8987 -z localhost:2181| When you are not using an example to start solr, make sure you upload the configuration set to ZooKeeper before creating the collection. |
Shut Down ZooKeeper
To shut down ZooKeeper, use the zkServer script with the "stop" command: zkServer.sh stop.
Setting up a ZooKeeper Ensemble
With an external ZooKeeper ensemble, you need to set things up just a little more carefully as compared to the Getting Started example.
The difference is that rather than simply starting up the servers, you need to configure them to know about and talk to each other first. So your original zoo.cfg file might look like this:
dataDir=/var/lib/zookeeperdata/1
clientPort=2181
initLimit=5
syncLimit=2
server.1=localhost:2888:3888
server.2=localhost:2889:3889
server.3=localhost:2890:3890Here you see three new parameters:
- initLimit
-
Amount of time, in ticks, to allow followers to connect and sync to a leader. In this case, you have 5 ticks, each of which is 2000 milliseconds long, so the server will wait as long as 10 seconds to connect and sync with the leader.
- syncLimit
-
Amount of time, in ticks, to allow followers to sync with ZooKeeper. If followers fall too far behind a leader, they will be dropped.
- server.X
-
These are the IDs and locations of all servers in the ensemble, the ports on which they communicate with each other. The server ID must additionally stored in the
<dataDir>/myidfile and be located in thedataDirof each ZooKeeper instance. The ID identifies each server, so in the case of this first instance, you would create the file/var/lib/zookeeperdata/1/myidwith the content "1".
Now, whereas with Solr you need to create entirely new directories to run multiple instances, all you need for a new ZooKeeper instance, even if it’s on the same machine for testing purposes, is a new configuration file. To complete the example you’ll create two more configuration files.
The <ZOOKEEPER_HOME>/conf/zoo2.cfg file should have the content:
tickTime=2000
dataDir=/var/lib/zookeeperdata/2
clientPort=2182
initLimit=5
syncLimit=2
server.1=localhost:2888:3888
server.2=localhost:2889:3889
server.3=localhost:2890:3890You’ll also need to create <ZOOKEEPER_HOME>/conf/zoo3.cfg:
tickTime=2000
dataDir=/var/lib/zookeeperdata/3
clientPort=2183
initLimit=5
syncLimit=2
server.1=localhost:2888:3888
server.2=localhost:2889:3889
server.3=localhost:2890:3890Finally, create your myid files in each of the dataDir directories so that each server knows which instance it is. The id in the myid file on each machine must match the "server.X" definition. So, the ZooKeeper instance (or machine) named "server.1" in the above example, must have a myid file containing the value "1". The myid file can be any integer between 1 and 255, and must match the server IDs assigned in the zoo.cfg file.
To start the servers, you can simply explicitly reference the configuration files:
cd <ZOOKEEPER_HOME>
bin/zkServer.sh start zoo.cfg
bin/zkServer.sh start zoo2.cfg
bin/zkServer.sh start zoo3.cfgOnce these servers are running, you can reference them from Solr just as you did before:
bin/solr start -e cloud -z localhost:2181,localhost:2182,localhost:2183 -nopromptSecuring the ZooKeeper Connection
You may also want to secure the communication between ZooKeeper and Solr.
To setup ACL protection of znodes, see ZooKeeper Access Control.
For more information on getting the most power from your ZooKeeper installation, check out the ZooKeeper Administrator’s Guide.
We welcome feedback on Solr documentation. However, we cannot provide application support via comments. If you need help, please send a message to the Solr User mailing list.