Configsets API

The Configsets API enables you to upload new configsets to ZooKeeper, create, and delete configsets when Solr is running SolrCloud mode.

Configsets are a collection of configuration files such as solrconfig.xml, synonyms.txt, the schema, language-specific files, and other collection-level configuration files (everything that normally lives in the conf directory). Solr ships with two example configsets (_default and sample_techproducts_configs) which can be used when creating collections. Using the same concept, you can create your own configsets and make them available when creating collections.

This API provides a way to upload configuration files to ZooKeeper and share the same set of configuration files between two or more collections.

Once a configset has been uploaded to ZooKeeper, use the configset name when creating the collection with the Collections API and the collection will use your configuration files.

Configsets do not have to be shared between collections if they are uploaded with this API, but this API makes it easier to do so if you wish. An alternative to uploading your configsets in advance would be to put the configuration files into a directory under server/solr/configsets and using the directory name as the -d parameter when using bin/solr create to create a collection.

This API can only be used with Solr running in SolrCloud mode. If you are not running Solr in SolrCloud mode but would still like to use shared configurations, please see the section Configsets.

The API works by passing commands to the configs endpoint. The path to the endpoint varies depending on the API being used: the v1 API uses solr/admin/configs, while the v2 API uses api/cluster/configs. Examples of both types are provided below.

List Configsets

The list command fetches the names of the configsets that are available for use during collection creation.

V1 API

With the v1 API, the list command must be capitalized as LIST:

http://localhost:8983/solr/admin/configs?action=LIST&omitHeader=true

V2 API

With the v2 API, the list command is implied when there is no data sent with the request.

http://localhost:8983/api/cluster/configs?omitHeader=true

The output will look like:

{
  "configSets": [
    "_default",
    "techproducts",
    "gettingstarted"
  ]
}

Upload a Configset

Upload a configset, which is sent as a zipped file. A single, non-zipped file can also be uploaded with the filePath parameter.

This functionality is enabled by default, but can be disabled via a runtime parameter -Dconfigset.upload.enabled=false. Disabling this feature is advisable if you want to expose Solr installation to untrusted users (even though you should never do that!).

A configset is uploaded in a "trusted" mode if authentication is enabled and the upload operation is performed as an authenticated request. Without authentication, a configset is uploaded in an "untrusted" mode. Upon creation of a collection using an "untrusted" configset, the following functionality will not work:

  • The XSLT transformer (tr parameter) cannot be used at request processing time.

  • If specified in the configset, the ScriptUpdateProcessorFactory will not initialize.

  • Collections won’t initialize if <lib> directives are used in the configset. (Note: Libraries added to Solr’s classpath don’t need the <lib> directive)

If you use any of these parameters or features, you must have enabled security features in your Solr installation and you must upload the configset as an authenticated user.

Not all file types are supported for use in configSets. Please see configuration-guide:config-sets.adoc#forbidden-file-types for more information.

The upload command takes the following parameters:

name

Required

Default: none

The configset to be created when the upload is complete.

overwrite

Optional

Default: see description

If set to true, Solr will overwrite an existing configset with the same name (if false, the request will fail). If filePath is provided, then this option specifies whether the specified file within the configset should be overwritten if it already exists. Default is false when using the v1 API, but true when using the v2 API.

cleanup

Optional

Default: false

When overwriting an existing configset (overwrite=true), this parameter tells Solr to delete the files in ZooKeeper that existed in the old configset but not in the one being uploaded. This parameter cannot be set to true when filePath is used.

filePath

Optional

Default: none

This parameter allows the uploading of a single, non-zipped file to the given path under the configset in ZooKeeper. This functionality respects the overwrite parameter, so a request will fail if the given file path already exists in the configset and overwrite is set to false. The cleanup parameter cannot be set to true when filePath is used.

If uploading an entire configset, the body of the request should be a zip file that contains the configset. The zip file must be created from within the conf directory (i.e., solrconfig.xml must be the top level entry in the zip file).

Here is an example on how to create the zip file named "myconfig.zip" and upload it as a configset named "myConfigSet":

V1 API

With the v1 API, the upload command must be capitalized as UPLOAD:

$ (cd solr/server/solr/configsets/sample_techproducts_configs/conf && zip -r - *) > myconfigset.zip

$ curl -X POST --header "Content-Type:application/octet-stream" --data-binary @myconfigset.zip "http://localhost:8983/solr/admin/configs?action=UPLOAD&name=myConfigSet"

The same can be achieved using a Unix pipe with a single request as follows:

$ (cd server/solr/configsets/sample_techproducts_configs/conf && zip -r - *) | curl -X POST --header "Content-Type:application/octet-stream" --data-binary @- "http://localhost:8983/solr/admin/configs?action=UPLOAD&name=myConfigSet"

V2 API

With the v2 API, the name of the configset to upload is provided as a path parameter:

$ (cd solr/server/solr/configsets/sample_techproducts_configs/conf && zip -r - *) > myconfigset.zip

$ curl -X PUT --header "Content-Type:application/octet-stream" --data-binary @myconfigset.zip
    "http://localhost:8983/api/cluster/configs/myConfigSet"

With this API, the default behavior is to overwrite the configset if it already exists. This behavior can be disabled with the parameter overwrite=false, in which case the request will fail if the configset already exists.

Here is an example on how to upload a single file to a configset named "myConfigSet":

V1 API

With the v1 API, the upload command must be capitalized as UPLOAD. The filename to upload is provided via the filePath parameter:

curl -X POST --header "Content-Type:application/octet-stream"
    --data-binary @solr/server/solr/configsets/sample_techproducts_configs/conf/solrconfig.xml
    "http://localhost:8983/solr/admin/configs?action=UPLOAD&name=myConfigSet&filePath=solrconfig.xml&overwrite=true"

V2 API

With the v2 API, the name of the configset and file are both provided in the URL. They can be substituted in /cluster/configs/config_name/file_name. The filename may be nested and include / characters.

curl -X PUT --header "Content-Type:application/octet-stream"
    --data-binary @solr/server/solr/configsets/sample_techproducts_configs/conf/solrconfig.xml
    "http://localhost:8983/api/cluster/configs/myConfigSet/solrconfig.xml"

With this API, the default behavior is to overwrite the file if it already exists within the configset. This behavior can be disabled with the parameter overwrite=false, in which case the request will fail if the file already exists within the configset.

Create a Configset

The create command creates a new configset based on a configset that has been previously uploaded.

If you have not yet uploaded any configsets, see the Upload a Configset command above.

The following parameters are supported when creating a configset.

name

Required

Default: none

The configset to be created.

baseConfigSet

Optional

Default: _default

The name of the configset to copy as a base.

configSetProp.property=value

Optional

Default: none

A configset property from the base configset to override in the copied configset.

For example, to create a configset named "myConfigset" based on a previously defined "predefinedTemplate" configset, overriding the immutable property to false.

V1 API

With the v1 API, the create command must be capitalized as CREATE:

http://localhost:8983/solr/admin/configs?action=CREATE&name=myConfigSet&baseConfigSet=predefinedTemplate&configSetProp.immutable=false&wt=xml&omitHeader=true

V2 API

With the v2 API, the create command is provided as part of the JSON data that contains the required parameters:

curl -X POST -H 'Content-type: application/json' -d '{
  "create":{
    "name": "myConfigSet",
    "baseConfigSet": "predefinedTemplate",
    "configSetProp.immutable": "false"}}'
    http://localhost:8983/api/cluster/configs?omitHeader=true

With the v2 API, configset properties can also be provided via the properties map:

curl -X POST -H 'Content-type: application/json' -d '{
  "create":{
    "name": "myConfigSet",
    "baseConfigSet": "predefinedTemplate",
    "properties": {
      "immutable": "false"
    }}}'
    http://localhost:8983/api/cluster/configs?omitHeader=true

Output

<response>
  <lst name="responseHeader">
    <int name="status">0</int>
    <int name="QTime">323</int>
  </lst>
</response>

Delete a Configset

The delete command removes a configset. It does not remove any collections that were created with the configset.

name

Required

Default: none

The configset to be deleted.

To delete a configset named "myConfigSet":

V1 API

With the v1 API, the delete command must be capitalized as DELETE. The name of the configset to delete is provided with the name parameter:

http://localhost:8983/solr/admin/configs?action=DELETE&name=myConfigSet&omitHeader=true

V2 API

With the v2 API, the delete command is provided as the request method, as in -X DELETE. The name of the configset to delete is provided as a path parameter:

curl -X DELETE http://localhost:8983/api/cluster/configs/myConfigSet?omitHeader=true

Output

<response>
  <lst name="responseHeader">
    <int name="status">0</int>
    <int name="QTime">170</int>
  </lst>
</response>