Other Parsers

Block Join Query Parsers

There are two query parsers that support block joins. These parsers allow indexing and searching for relational content that has been indexed as Nested Documents.

The example usage of the query parsers below assumes these two documents and each of their child documents have been indexed:

<add>
  <doc>
  <field name="id">1</field>
  <field name="title">Solr has block join support</field>
  <field name="content_type">parentDocument</field>
    <doc>
      <field name="id">2</field>
      <field name="comments">SolrCloud supports it too!</field>
    </doc>
  </doc>
  <doc>
    <field name="id">3</field>
    <field name="title">New Lucene and Solr release</field>
    <field name="content_type">parentDocument</field>
    <doc>
      <field name="id">4</field>
      <field name="comments">Lots of new features</field>
    </doc>
  </doc>
</add>

<result name="response" numFound="1" start="0">
  <doc>
    <str name="id">4</str>
    <str name="comments">Lots of new features</str>
  </doc>
</result>

Parent query must not match any docs besides parent filter. Combine them as must (+) and must-not (-) clauses to find a problem doc.

{!child of=<allParents> filters=$parentfq excludeTags=certain}<someParents>&parentfq=BRAND:Foo&parentfq=NAME:Bar&parentfq={!tag=certain}CATEGORY:Baz

{!child of=<allParents>}+<someParents> +BRAND:Foo +NAME:Bar

Child query must not match same docs with parent filter. Combine them as must clauses (+) to find a problem doc.

<result name="response" numFound="1" start="0">
  <doc>
    <str name="id">1</str>
    <arr name="title"><str>Solr has block join support</str></arr>
    <arr name="content_type"><str>parentDocument</str></arr>
  </doc>
</result>

{!parent which=<allParents> filters=$childfq excludeTags=certain}<someChildren>&
childfq=COLOR:Red&
childfq=SIZE:XL&
childfq={!tag=certain}PRINT:Hatched

{!parent which=<allParents>}+<someChildren> +COLOR:Red +SIZE:XL

Boolean Query Parser

The BoolQParser creates a Lucene BooleanQuery which is a boolean combination of other queries. Sub-queries along with their typed occurrences indicate how documents will be matched and scored.

Parameters

Examples

{!bool must=foo must=bar}

{!bool filter=foo should=bar}

Boost Query Parser

BoostQParser extends the QParserPlugin and creates a boosted query from the input value. The main value is the query to be boosted. Parameter b is the function query to use as the boost. The query to be boosted may be of any type.

{!boost b=log(popularity)}foo

{!boost b=recip(ms(NOW,mydatefield),3.16e-11,1,1)}foo

Collapsing Query Parser

The CollapsingQParser is really a post filter that provides more performant field collapsing than Solr’s standard approach when the number of distinct groups in the result set is high.

This parser collapses the result set to a single document per group before it forwards the result set to the rest of the search components. So all downstream components (faceting, highlighting, etc.) will work with the collapsed result set.

Details about using the CollapsingQParser can be found in the section Collapse and Expand Results.

Complex Phrase Query Parser

The ComplexPhraseQParser provides support for wildcards, ORs, etc., inside phrase queries using Lucene’s ComplexPhraseQueryParser.

Under the covers, this query parser makes use of the Span group of queries, e.g., spanNear, spanOr, etc., and is subject to the same limitations as that family or parsers.

Parameters

Examples

{!complexphrase inOrder=true}name:"Jo* Smith"

{!complexphrase inOrder=false}name:"(john jon jonathan~) peters*"

A mix of ordered and unordered complex phrase queries:

+_query_:"{!complexphrase inOrder=true}manu:\"a* c*\"" +_query_:"{!complexphrase inOrder=false df=name}\"bla* pla*\""

<maxBooleanClauses>4096</maxBooleanClauses>

 q=features:"Stores up to 15,000"

 q=features:"sto* up to 15*"&defType=complexphrase

Field Query Parser

The FieldQParser extends the QParserPlugin and creates a field query from the input value, applying text analysis and constructing a phrase query if appropriate. The parameter f is the field to be queried.

Example:

{!field f=myfield}Foo Bar

This example creates a phrase query with "foo" followed by "bar" (assuming the analyzer for myfield is a text field with an analyzer that splits on whitespace and lowercase terms). This is generally equivalent to the Lucene query parser expression myfield:"Foo Bar".

Filters Query Parser

The syntax is:

q={!filters param=$fqs excludeTags=sample}field:text&
fqs=COLOR:Red&
fqs=SIZE:XL&
fqs={!tag=sample}BRAND:Foo

which is equivalent to:

q=+field:text +COLOR:Red +SIZE:XL

param local parameter uses "$" syntax to refer to a few queries, where excludeTags may omit some of them.

Function Query Parser

The FunctionQParser extends the QParserPlugin and creates a function query from the input value. This is only one way to use function queries in Solr; for another, more integrated, approach, see the section on Function Queries.

Example:

{!func}log(foo)

Function Range Query Parser

The FunctionRangeQParser extends the QParserPlugin and creates a range query over a function. This is also referred to as frange, as seen in the examples below.

Parameters

Examples

{!frange l=1000 u=50000}myfield

 fq={!frange l=0 u=2.2} sum(user_ranking,editor_ranking)

Both of these examples restrict the results by a range of values found in a declared field or a function query. In the second example, we’re doing a sum calculation, and then defining only values between 0 and 2.2 should be returned to the user.

For more information about range queries over functions, see Yonik Seeley’s introductory blog post Ranges over Functions in Solr 1.4.

Graph Query Parser

The graph query parser does a breadth first, cyclic aware, graph traversal of all documents that are "reachable" from a starting set of root documents identified by a wrapped query.

The graph is built according to linkages between documents based on the terms found in from and to fields that you specify as part of the query.

Supported field types are point fields with docValues enabled, or string fields with indexed=true or docValues=true.

Graph Query Examples

To understand how the graph parser works, consider the following Directed Cyclic Graph, containing 8 nodes (A to H) and 9 edges (1 to 9):

One way to model this graph as Solr documents, would be to create one document per node, with mutivalued fields identifying the incoming and outgoing edges for each node:

curl -H 'Content-Type: application/json' 'http://localhost:8983/solr/my_graph/update?commit=true' --data-binary '[
  {"id":"A","foo":  7, "out_edge":["1","9"],  "in_edge":["4","2"]  },
  {"id":"B","foo": 12, "out_edge":["3","6"],  "in_edge":["1"]      },
  {"id":"C","foo": 10, "out_edge":["5","2"],  "in_edge":["9"]      },
  {"id":"D","foo": 20, "out_edge":["4","7"],  "in_edge":["3","5"]  },
  {"id":"E","foo": 17, "out_edge":[],         "in_edge":["6"]      },
  {"id":"F","foo": 11, "out_edge":[],         "in_edge":["7"]      },
  {"id":"G","foo":  7, "out_edge":["8"],      "in_edge":[]         },
  {"id":"H","foo": 10, "out_edge":[],         "in_edge":["8"]      }
]'

With the model shown above, the following query demonstrates a simple traversal of all nodes reachable from node A:

http://localhost:8983/solr/my_graph/query?fl=id&q={!graph+from=in_edge+to=out_edge}id:A

"response":{"numFound":6,"start":0,"docs":[
   { "id":"A" },
   { "id":"B" },
   { "id":"C" },
   { "id":"D" },
   { "id":"E" },
   { "id":"F" } ]
}

We can also use the traversalFilter to limit the graph traversal to only nodes with maximum value of 15 in the foo field. In this case that means D, E, and F are excluded – F has a value of foo=11, but it is unreachable because the traversal skipped D:

http://localhost:8983/solr/my_graph/query?fl=id&q={!graph+from=in_edge+to=out_edge+traversalFilter='foo:[*+TO+15]'}id:A

...
"response":{"numFound":3,"start":0,"docs":[
   { "id":"A" },
   { "id":"B" },
   { "id":"C" } ]
}

The examples shown so far have all used a query for a single document ("id:A") as the root node for the graph traversal, but any query can be used to identify multiple documents to use as root nodes. The next example demonstrates using the maxDepth parameter to find all nodes that are at most one edge away from an root node with a value in the foo field less then or equal to 10:

http://localhost:8983/solr/my_graph/query?fl=id&q={!graph+from=in_edge+to=out_edge+maxDepth=1}foo:[*+TO+10]

...
"response":{"numFound":6,"start":0,"docs":[
   { "id":"A" },
   { "id":"B" },
   { "id":"C" },
   { "id":"D" },
   { "id":"G" },
   { "id":"H" } ]
}

curl -H 'Content-Type: application/json' 'http://localhost:8983/solr/alt_graph/update?commit=true' --data-binary '[
  {"id":"A","foo":  7, "out_edge":["B","C"] },
  {"id":"B","foo": 12, "out_edge":["E","D"] },
  {"id":"C","foo": 10, "out_edge":["A","D"] },
  {"id":"D","foo": 20, "out_edge":["A","F"] },
  {"id":"E","foo": 17, "out_edge":[]        },
  {"id":"F","foo": 11, "out_edge":[]        },
  {"id":"G","foo":  7, "out_edge":["H"]     },
  {"id":"H","foo": 10, "out_edge":[]        }
  ]'

http://localhost:8983/solr/alt_graph/query?fl=id&q={!graph+from=id+to=out_edge+maxDepth=1}foo:[*+TO+10]

...
"response":{"numFound":6,"start":0,"docs":[
   { "id":"A" },
   { "id":"B" },
   { "id":"C" },
   { "id":"D" },
   { "id":"G" },
   { "id":"H" } ]
}

Join Query Parser

JoinQParser extends the QParserPlugin. It allows normalizing relationships between documents with a join operation. This is different from the concept of a join in a relational database because no information is being truly joined. An appropriate SQL analogy would be an "inner query".

Examples:

Find all products containing the word "ipod", join them against manufacturer docs and return the list of manufacturers:

{!join from=manu_id_s to=id}ipod

Find all manufacturer docs named "belkin", join them against product docs, and filter the list to only products with a price less than $12:

q  = {!join from=id to=manu_id_s}compName_s:Belkin
fq = price:[* TO 12]

The join operation is done on a term basis, so the "from" and "to" fields must use compatible field types. For example: joining between a StrField and a IntPointField will not work, likewise joining between a StrField and a TextField that uses LowerCaseFilterFactory will only work for values that are already lower cased in the string field.

fq={!join from=id fromIndex=movie_directors to=director_id}has_oscar:true

Lucene Query Parser

The LuceneQParser extends the QParserPlugin by parsing Solr’s variant on the Lucene QueryParser syntax. This is effectively the same query parser that is used in Lucene. It uses the operators q.op, the default operator ("OR" or "AND") and df, the default field name.

Example:

{!lucene q.op=AND df=text}myfield:foo +bar -baz

For more information about the syntax for the Lucene Query Parser, see the Classic QueryParser javadocs.

Learning To Rank Query Parser

The LTRQParserPlugin is a special purpose parser for reranking the top results of a simple query using a more complex ranking query which is based on a machine learnt model.

Example:

{!ltr model=myModel reRankDocs=100}

Details about using the LTRQParserPlugin can be found in the Learning To Rank section.

Max Score Query Parser

The MaxScoreQParser extends the LuceneQParser but returns the Max score from the clauses. It does this by wrapping all SHOULD clauses in a DisjunctionMaxQuery with tie=1.0. Any MUST or PROHIBITED clauses are passed through as-is. Non-boolean queries, e.g., NumericRange falls-through to the LuceneQParser parser behavior.

Example:

{!maxscore tie=0.01}C OR (D AND E)

More Like This Query Parser

MLTQParser enables retrieving documents that are similar to a given document. It uses Lucene’s existing MoreLikeThis logic and also works in SolrCloud mode. The document identifier used here is the unique id value and not the Lucene internal document id. The list of returned documents excludes the queried document.

This query parser takes the following parameters:

Examples

Find documents like the document with id=1 and using the name field for similarity.

{!mlt qf=name}1

Adding more constraints to what qualifies as similar using mintf and mindf.

{!mlt qf=name mintf=2 mindf=3}1

Nested Query Parser

The NestedParser extends the QParserPlugin and creates a nested query, with the ability for that query to redefine its type via local parameters. This is useful in specifying defaults in configuration and letting clients indirectly reference them.

Example:

{!query defType=func v=$q1}

If the q1 parameter is price, then the query would be a function query on the price field. If the q1 parameter is \{!lucene}inStock:true}} then a term query is created from the Lucene syntax string that matches documents with inStock=true. These parameters would be defined in solrconfig.xml, in the defaults section:

<lst name="defaults">
  <str name="q1">{!lucene}inStock:true</str>
</lst>

For more information about the possibilities of nested queries, see Yonik Seeley’s blog post Nested Queries in Solr.

Payload Query Parsers

These query parsers utilize payloads encoded on terms during indexing.

The main query, for both of these parsers, is parsed straightforwardly from the field type’s query analysis into a SpanQuery. The generated SpanQuery will be either a SpanTermQuery or an ordered, zero slop SpanNearQuery, depending on how many tokens are emitted. Payloads can be encoded on terms using either the DelimitedPayloadTokenFilter or the NumericPayloadTokenFilter. The payload using parsers are:

{!payload_score f=my_field_dpf v=some_term func=max}

{!payload_score f=payload_field func=sum operator=or}A B C

{!payload_check f=words_dps payloads="VERB NOUN"}searching stuff

Prefix Query Parser

PrefixQParser extends the QParserPlugin by creating a prefix query from the input value. Currently no analysis or value transformation is done to create this prefix query.

The parameter is f, the field. The string after the prefix declaration is treated as a wildcard query.

Example:

{!prefix f=myfield}foo

This would be generally equivalent to the Lucene query parser expression myfield:foo*.

Raw Query Parser

RawQParser extends the QParserPlugin by creating a term query from the input value without any text analysis or transformation. This is useful in debugging, or when raw terms are returned from the terms component (this is not the default).

The only parameter is f, which defines the field to search.

Example:

{!raw f=myfield}Foo Bar

This example constructs the query: TermQuery(Term("myfield","Foo Bar")).

For easy filter construction to drill down in faceting, the TermQParserPlugin is recommended.

For full analysis on all fields, including text fields, you may want to use the FieldQParserPlugin.

Re-Ranking Query Parser

The ReRankQParserPlugin is a special purpose parser for Re-Ranking the top results of a simple query using a more complex ranking query.

Details about using the ReRankQParserPlugin can be found in the Query Re-Ranking section.

Simple Query Parser

The Simple query parser in Solr is based on Lucene’s SimpleQueryParser. This query parser is designed to allow users to enter queries however they want, and it will do its best to interpret the query and return results.

This parser takes the following parameters:

Any errors in syntax are ignored and the query parser will interpret queries as best it can. However, this can lead to odd results in some cases.

Spatial Query Parsers

There are two spatial QParsers in Solr: geofilt and bbox. But there are other ways to query spatially: using the frange parser with a distance function, using the standard (lucene) query parser with the range syntax to pick the corners of a rectangle, or with RPT and BBoxField you can use the standard query parser but use a special syntax within quotes that allows you to pick the spatial predicate.

All these options are documented further in the section Spatial Search.

Surround Query Parser

The SurroundQParser enables the Surround query syntax, which provides proximity search functionality. There are two positional operators: w creates an ordered span query and n creates an unordered one. Both operators take a numeric value to indicate distance between two terms. The default is 1, and the maximum is 99.

Note that the query string is not analyzed in any way.

Example:

{!surround} 3w(foo, bar)

This example finds documents where the terms "foo" and "bar" are no more than 3 terms away from each other (i.e., no more than 2 terms between them).

This query parser will also accept boolean operators (AND, OR, and NOT, in either upper- or lowercase), wildcards, quoting for phrase searches, and boosting. The w and n operators can also be expressed in upper- or lowercase.

The non-unary operators (everything but NOT) support both infix (a AND b AND c) and prefix AND(a, b, c) notation.

Switch Query Parser

SwitchQParser is a QParserPlugin that acts like a "switch" or "case" statement.

The primary input string is trimmed and then prefixed with case. for use as a key to lookup a "switch case" in the parser’s local params. If a matching local param is found the resulting param value will then be parsed as a subquery, and returned as the parse result.

The case local param can be optionally be specified as a switch case to match missing (or blank) input strings. The default local param can optionally be specified as a default case to use if the input string does not match any other switch case local params. If default is not specified, then any input which does not match a switch case local param will result in a syntax error.

In the examples below, the result of each query is "XXX":

{!switch case.foo=XXX case.bar=zzz case.yak=qqq}foo

{!switch case.foo=qqq case.bar=XXX case.yak=zzz} bar

{!switch case.foo=qqq case.bar=zzz default=XXX}asdf

{!switch case=XXX case.bar=zzz case.yak=qqq}

A practical usage of this parser, is in specifying appends filter query (fq) parameters in the configuration of a SearchHandler, to provide a fixed set of filter options for clients using custom parameter names.

Using the example configuration below, clients can optionally specify the custom parameters in_stock and shipping to override the default filtering behavior, but are limited to the specific set of legal values (shipping=any|free, in_stock=yes|no|all).

<requestHandler name="/select" class="solr.SearchHandler">
  <lst name="defaults">
    <str name="in_stock">yes</str>
    <str name="shipping">any</str>
  </lst>
  <lst name="appends">
    <str name="fq">{!switch case.all='*:*'
                            case.yes='inStock:true'
                            case.no='inStock:false'
                            v=$in_stock}</str>
    <str name="fq">{!switch case.any='*:*'
                            case.free='shipping_cost:0.0'
                            v=$shipping}</str>
  </lst>
</requestHandler>

Term Query Parser

TermQParser extends the QParserPlugin by creating a single term query from the input value equivalent to readableToIndexed(). This is useful for generating filter queries from the external human readable terms returned by the faceting or terms components. The only parameter is f, for the field.

Example:

{!term f=weight}1.5

For text fields, no analysis is done since raw terms are already returned from the faceting and terms components. To apply analysis to text fields as well, see the Field Query Parser, above.

If no analysis or transformation is desired for any type of field, see the Raw Query Parser, above.

Terms Query Parser

TermsQParser functions similarly to the Term Query Parser but takes in multiple values separated by commas and returns documents matching any of the specified values.

This can be useful for generating filter queries from the external human readable terms returned by the faceting or terms components, and may be more efficient in some cases than using the Standard Query Parser to generate a boolean query since the default implementation method avoids scoring.

This query parser takes the following parameters:

Examples

{!terms f=tags}software,apache,solr,lucene

{!terms f=categoryId method=booleanQuery separator=" "}8 6 7 5309

XML Query Parser

The XmlQParserPlugin extends the QParserPlugin and supports the creation of queries from XML. Example:

<BooleanQuery fieldName="description">
   <Clause occurs="must">
      <TermQuery>shirt</TermQuery>
   </Clause>
   <Clause occurs="mustnot">
      <TermQuery>plain</TermQuery>
   </Clause>
   <Clause occurs="should">
      <TermQuery>cotton</TermQuery>
   </Clause>
   <Clause occurs="must">
      <BooleanQuery fieldName="size">
         <Clause occurs="should">
            <TermsQuery>S M L</TermsQuery>
         </Clause>
      </BooleanQuery>
   </Clause>
</BooleanQuery>

The XmlQParser implementation uses the SolrCoreParser class which extends Lucene’s CoreParser class. XML elements are mapped to QueryBuilder classes as follows:

<queryParser name="xmlparser" class="XmlQParserPlugin">
  <str name="MyCustomQuery">com.mycompany.solr.search.MyCustomQueryBuilder</str>
</queryParser>