The Terms Component

The Terms Component provides access to the indexed terms in a field and the number of documents that match each term. This can be useful for building an auto-suggest feature or any other feature that operates at the term level instead of the search or document level. Retrieving terms in index order is very fast since the implementation directly uses Lucene’s TermEnum to iterate over the term dictionary.

In a sense, this search component provides fast field-faceting over the whole index, not restricted by the base query or any filters. The document frequencies returned are the number of documents that match the term, including any documents that have been marked for deletion but not yet removed from the index.

Configuring the Terms Component

By default, the Terms Component is already configured in solrconfig.xml for each collection.

Defining the Terms Component

Defining the Terms search component is straightforward: simply give it a name and use the class solr.TermsComponent.

<searchComponent name="terms" class="solr.TermsComponent"/>

This makes the component available for use, but by itself will not be useable until included with a request handler.

Using the Terms Component in a Request Handler

The terms component is included with the /terms request handler, which is among Solr’s out-of-the-box request handlers - see Implicit RequestHandlers.

Note that the defaults for this request handler set the parameter "terms" to true, which allows terms to be returned on request. The parameter "distrib" is set to false, which allows this handler to be used only on a single Solr core.

You could add this component to another handler if you wanted to, and pass "terms=true" in the HTTP request in order to get terms back. If it is only defined in a separate handler, you must use that handler when querying in order to get terms and not regular documents as results.

Terms Component Parameters

The parameters below allow you to control what terms are returned. You can also configure any of these with the request handler if you’d like to set them permanently. Or, you can add them to the query request. These parameters are:

terms

If set to true, enables the Terms Component. By default, the Terms Component is off (false).

Example: terms=true

terms.fl

Specifies the field from which to retrieve terms. This parameter is required if terms=true.

Example: terms.fl=title

terms.list

Fetches the document frequency for a comma delimited list of terms. Terms are always returned in index order. If terms.ttf is set to true, also returns their total term frequency. If multiple terms.fl are defined, these statistics will be returned for each term in each requested field.

Example: terms.list=termA,termB,termC

terms.limit

Specifies the maximum number of terms to return. The default is 10. If the limit is set to a number less than 0, then no maximum limit is enforced. Although this is not required, either this parameter or terms.upper must be defined.

Example: terms.limit=20

terms.lower

Specifies the term at which to start. If not specified, the empty string is used, causing Solr to start at the beginning of the field.

Example: terms.lower=orange

terms.lower.incl

If set to true, includes the lower-bound term (specified with terms.lower in the result set.

Example: terms.lower.incl=false

terms.mincount

Specifies the minimum document frequency to return in order for a term to be included in a query response. Results are inclusive of the mincount (that is, >= mincount).

Example: terms.mincount=5

terms.maxcount

Specifies the maximum document frequency a term must have in order to be included in a query response. The default setting is -1, which sets no upper bound. Results are inclusive of the maxcount (that is, <= maxcount).

Example: terms.maxcount=25

terms.prefix

Restricts matches to terms that begin with the specified string.

Example: terms.prefix=inter

terms.raw

If set to true, returns the raw characters of the indexed term, regardless of whether it is human-readable. For instance, the indexed form of numeric numbers is not human-readable.

Example: terms.raw=true

terms.regex

Restricts matches to terms that match the regular expression.

Example: terms.regex=.*pedist

terms.regex.flag
Defines a Java regex flag to use when evaluating the regular expression defined with terms.regex. See http://docs.oracle.com/javase/tutorial/essential/regex/pattern.html for details of each flag. Valid options are:
  • case_insensitive
  • comments
  • multiline
  • literal
  • dotall
  • unicode_case
  • canon_eq
  • unix_lines

    Example: terms.regex.flag=case_insensitive

terms.stats
Include index statistics in the results. Currently returns only the numDocs for a collection. When combined with terms.list it provides enough information to compute inverse document frequency (IDF) for a list of terms.
terms.sort

Defines how to sort the terms returned. Valid options are count, which sorts by the term frequency, with the highest term frequency first, or index, which sorts in index order.

Example: terms.sort=index

terms.ttf

If set to true, returns both df (docFreq) and ttf (totalTermFreq) statistics for each requested term in terms.list. In this case, the response format is:

<lst name="terms">
  <lst name="field">
    <lst name="termA">
      <long name="df">22</long>
      <long name="ttf">73</long>
    </lst>
  </lst>
</lst>
terms.upper

Specifies the term to stop at. Although this parameter is not required, either this parameter or terms.limit must be defined.

Example: terms.upper=plum

terms.upper.incl

If set to true, the upper bound term is included in the result set. The default is false.

Example: terms.upper.incl=true

The response to a terms request is a list of the terms and their document frequency values.

You may also be interested in the TermsComponent javadoc.

Terms Component Examples

All of the following sample queries work with Solr’s “bin/solr -e techproducts” example.

Get Top 10 Terms

This query requests the first ten terms in the name field:

http://localhost:8983/solr/techproducts/terms?terms.fl=name&wt=xml

Results:

<response>
  <lst name="responseHeader">
    <int name="status">0</int>
    <int name="QTime">2</int>
  </lst>
  <lst name="terms">
    <lst name="name">
      <int name="one">5</int>
      <int name="184">3</int>
      <int name="1gb">3</int>
      <int name="3200">3</int>
      <int name="400">3</int>
      <int name="ddr">3</int>
      <int name="gb">3</int>
      <int name="ipod">3</int>
      <int name="memory">3</int>
      <int name="pc">3</int>
    </lst>
  </lst>
</response>

Get First 10 Terms Starting with Letter 'a'

This query requests the first ten terms in the name field, in index order (instead of the top 10 results by document count):

http://localhost:8983/solr/techproducts/terms?terms.fl=name&terms.lower=a&terms.sort=index&wt=xml

Results:

<response>
  <lst name="responseHeader">
    <int name="status">0</int>
    <int name="QTime">0</int>
  </lst>
  <lst name="terms">
    <lst name="name">
      <int name="a">1</int>
      <int name="all">1</int>
      <int name="apple">1</int>
      <int name="asus">1</int>
      <int name="ata">1</int>
      <int name="ati">1</int>
      <int name="belkin">1</int>
      <int name="black">1</int>
      <int name="british">1</int>
      <int name="cable">1</int>
    </lst>
  </lst>
</response>

SolrJ Invocation

    SolrQuery query = new SolrQuery();
    query.setRequestHandler("/terms");
    query.setTerms(true);
    query.setTermsLimit(5);
    query.setTermsLower("s");
    query.setTermsPrefix("s");
    query.addTermsField("terms_s");
    query.setTermsMinCount(1);

    QueryRequest request = new QueryRequest(query);
    List<Term> terms = request.process(getSolrClient()).getTermsResponse().getTerms("terms_s");

Using the Terms Component for an Auto-Suggest Feature

If the Suggester doesn’t suit your needs, you can use the Terms component in Solr to build a similar feature for your own search application. Simply submit a query specifying whatever characters the user has typed so far as a prefix. For example, if the user has typed "at", the search engine’s interface would submit the following query:

http://localhost:8983/solr/techproducts/terms?terms.fl=name&terms.prefix=at&wt=xml

Result:

<response>
  <lst name="responseHeader">
    <int name="status">0</int>
    <int name="QTime">1</int>
  </lst>
  <lst name="terms">
    <lst name="name">
      <int name="ata">1</int>
      <int name="ati">1</int>
    </lst>
  </lst>
</response>

You can use the parameter omitHeader=true to omit the response header from the query response, like in this example, which also returns the response in JSON format:

http://localhost:8983/solr/techproducts/terms?terms.fl=name&terms.prefix=at&omitHeader=true

Result:

{
  "terms": {
    "name": [
      "ata",
      1,
      "ati",
      1
    ]
  }
}

Distributed Search Support

The TermsComponent also supports distributed indexes. For the /terms request handler, you must provide the following two parameters:

shards

Specifies the shards in your distributed indexing configuration. For more information about distributed indexing, see Distributed Search with Index Sharding.

The shards parameter is subject to a host whitelist that has to be configured in the component’s parameters using the configuration key shardsWhitelist and the list of hosts as values.

By default the whitelist will be populated with all live nodes when running in SolrCloud mode. If you need to disable this feature for backwards compatibility, you can set the system property solr.disable.shardsWhitelist=true.

See the section Configuring the ShardHandlerFactory for more information about how the whitelist works.

shards.qt
Specifies the request handler Solr uses for requests to shards.